31
MA_VEB200-2_A3_210511_en.doc
3.12
Setting the positions
3.12.1
General notes
The individual positions of the machine (machine positions) can be found in the
operating manual of the sewing machine.
N O T E !
For sewing machines that actually need only one position, both positions always
need to be programmed anyway for the control programming. This is because the
needle does have to be positioned somewhere following a change in display in
observance
of the notes in chapter “3.11 Positions”.
The setting of the positions can be easily checked using the F-172 function. Refer to
chapter “3.13 Display of the needle positions”.
3.12.2
Setting the reference position
After entering the code number “1907” and button “E” for the technician level:
-
Select parameter F-170.
Display shows:
.1.7.0.
-
Press “E” button.
Sr1_
-
Press “>>” button.
P0
I_I
Turn the handwheel in the machine's direction of rotation
until the circulation symbol disappears from the display. Set
the handwheel or needle to the sewing machine's reference
position (Refer to chapter “3.10 Cutting position”).
-
Press “E” button.
.1.7.1.
-
Exit the programming level by pressing the “P” button
or
continue with chapter “3.12.3 Setting positions 1 and 2” as of step 2.
Summary of Contents for VEB 200-2
