Strobel VEB 200-2, Mechanic'S Instructions

Page: 28 / 54

24
MA_VEB200-2_A3_210511_en.doc
3.8 Thread trimmer (Fig. 15)
The blade of the thread trimmer is activated by a rotary magnet, to which an electric
release control system (microswitch) is connected. This prevents the machine from
starting when the blade is no longer in its inital position. Thus the release control
system prevents a possible collision between blade and looper.
3.8.1 Removing and remounting of the thread trimmer drive (Fig. 15)
A T T E N T I O N !
Switch off machine electrically!
-
Remove plug (1).
-
Loosen the screw (2) and remove from blade (3), spring (4) and disc (5).
-
Loosen the screw (6) on the stitch plate clamp (7) and remove the thread
trimmer drive.
-
Installation in reverse order.
Ensure the blade is in correct position on the shaft!