Strobel VEB 200-2, Mechanic'S Instructions

Page: 31 / 54

27
MA_VEB200-2_A3_210511_en.doc
3.8.3 Replacing the knife (Fig. 15)
A T T E N T I O N !
Switch off machine electrically!
To replace cylinder head screw (2), unscrew it (hold shaft (14) with open-end wrench 5
mm).
CAUTION: Do not hold onto the rotary knob (15) since the gearwheels can be
damaged!
The nose of knife (3) should sit in the shaft's groove to guarantee the right position for
the thread trimming.
Turn the main shaft manually and check the trimming position. (Fig. 16)
3.9 Sense of rotation
The correct sense of rotation of the hand wheel is clockwise.
The positions are properly set in the factory.
3.10 Cutting position
The machine should be positioned in such a way as the pedal is stepped back that the
distance between looper and blade in cutting position is approx. 1 mm.
For Strobel and EFKA controls, this corresponds to parameter 171, position P2E.