STRIDE SE-MC2U-SC, User Manual

Page: 23 / 230

LED Indicators
Overview
The Stride industrial Ethernet switches have 1 or 2 communication LEDs for each port and
a power LED. The managed models also have an “OK” output LED, a status LED and dual
power LEDs.
Status LED
Managed Models Only: The Status LED indicates the overall health of the switch. It is
normally ON solid indicating that no internal CPU or software problems are detected. It
will flash when loading firmware and briefly on power up or reset. Otherwise, if it is OFF or
flashing for an extended period of time then a problem is detected. In this case, please contact
AutomationDirect for support.
Power LED
On unmanaged models there is one power LED that is ON if either power input(P1 or P2) has
power applied to it. On the managed models there are two Power LEDs that indicate if there
is power applied to the respective input.
Explanation of LED Indicators continued on next page.
Stride Industrial Ethernet Switches User Manual 2nd Ed. Rev. B
Chapter 1 - Hardware
The activity,
link and
speed LEDs
are
integrated
into the
RJ45 ports
Status
LED
The activity,
link and
speed LEDs
are
integrated
into a single
multi-color
LED. They
are labeled
for each port
number.
Power &
OK
LEDs
See the ACT/LNK and Speed 10/100 LED
explanations that follow below & on next page
See the ACT/LNK/Speed LED explanation
that follows on the next page.
Power
LED
1-9
Fiber
LED
Managed Unmanaged