STRIDE SE-MC2U-SC, User Manual

Page: 70 / 230

System Information
The System Information screen simply provides the information shown below. The screen is
updated every five seconds.
Model: This field shows the model number of this particular switch. It is set by the factory
and cannot be changed.
Description:
This field displays more descriptive information about this particular switch
model. It is also set by the factory and is not changeable. This data is available via SNMP as
SYSTEM.SYSDESCR.0.
System Name:
This field is configured by the user with the appropriate text for their
application. It is configured in the “System Settings” tab under the Main Settings section.
This field is also used as the hostname of the switch and, therefore, must contain only digits,
dashes and letters. It is also available via SNMP as SYSTEM.SYSNAME.0.
Switch Location: This field is configured by the user with the appropriate text for their
application. It is configured in the “System Settings” tab under the Main Settings section.
This data is available via SNMP as SYSTEM.SYSLOCATION.0.
Contact: This field is configured by the user with the appropriate text for their application.
It is configured in the “System Settings” tab under the Main Settings section. This data is
available via SNMP as SYSTEM.SYSCONTACT.0.
IPv4 address: This field displays the current configured IPv4 address. IPv4 is the traditional
4 octet Internet Protocol address. An IPv4 address comprises 4 8-bit numbers separated
by a period. Each number can be between 0 and 255 (some of the fields have more strict
Stride Industrial Ethernet Switches User Manual 2nd Ed. Rev. B
Chapter 3 - Managed Switch Software Monitoring
3-2