STRIDE SE-MC2U-SC, User Manual

Page: 154 / 230

Configuration Management
One “checkpoint” (backup) version of the switch’s configuration can be stored in a local file
on the switch. Unlimited backups can also be saved to your local system (web interface only)
or to a TFTP server elsewhere on the network.
Save Checkpoint:
Saves a checkpoint configuration in the switch, which may be used later to
revert back to the current state if changes lead to an undesirable configuration.
Restore Checkpoint: Reverts to the settings in the saved checkpoint. You can choose to keep
your current network settings or use the ones in the checkpoint file.
Download Checkpoint: Saves a zipped file of the current configuration file external to the
switch
Upload Checkpoint: Unzips the selected file and stores a copy on the switch. It must be
restored via Restore Checkpoint to be written as the switch configuration.
TFTP Configuration:
Specifies the name or IP address of the TFTP (Trivial File Transfer
Protocol) server where configuration checkpoints may be stored.
NOTE: The current administrator’s password will remain in effect after the restoration. SNMP passwords will be restored
to the values in the checkpoint.
Stride Industrial Ethernet Switches User Manual 2nd Ed. Rev. B
Chapter 5 - Managed Switch Software Advanced Operations
5-2