property.
- Only use the tiller in daylight or in good artificial light.
- Do not work with the tiller when you are barefoot or wearing open sandals. Always wear sturdy shoes and
long pants when working. Do not wear loose clothing or jewelry. Make sure that your hair, clothing, gloves
or any other part of your body does not come too close to the rotating or hot parts of the machine.
- When using the machine, be careful and vigilant, paying maximum attention to the activity you are currently
performing. Focus on work. Do not operate the tiller if you are tired or under the influence of drugs, alcohol
or medication. Even a moment of inattention while using the tiller can lead to serious injury. Do not eat, drink
or smoke when working with the tiller.
- Thoroughly inspect the place of use in advance and remove any objects that could be thrown by the
machine.
- Always visually inspect the tiller's knives for wear or damage before use. To keep the balance, replace worn
or damaged elements and screws in the kits.
- Always maintain a firm stance on slopes and do not work with the tiller on too steep slopes.
-Walk at work, do not run under any circumstances.
- When starting the engine, proceed carefully and follow the manufacturer's instructions, keeping the feet at
a safe distance from the cultivating knives.
- Do not reach under or near rotating parts with your hands or feet.
- Never lift or carry the machine while the engine is running.
- Under make any changes to the device under any circumstances. Illegal changes could negatively affect it
safety of your equipment and result in increased noise and vibration.
-
Turn off the tiller:
a) whenever you move away from the device,
b) when you want to remove dirt blocking the device,
c) when you inspect, clean or do anything else (repair it),
d) if it starts to vibrate abnormally (check immediately).
- Check and maintain the tightness of all nuts and bolts to ensure safe operating condition of the
equipment.
- For safety reasons, replace worn or damaged parts.
ASSEMBLY
PACKAGE CONTENTS
1 pc tiller
1 pc right part of the handlebars
1 pc digging support
1 pc lower part of the handlebars
1 pc wheel
1 pc left part of the handlebars
1 pc instructions for use
UNPACKING
- Carefully unpack the machine.
- Check the contents of the package and contact the dealer or manufacturer if any parts are missing or
damaged.
- Do not dispose of packaging materials unless you have checked the completeness of the package contents.
- Under no circumstances leave packaging materials (e.g. plastic bags, paper clips, etc.) in the immediate
vicinity of children and do not allow them to play with them. There is a risk of swallowing or suffocation.
- Dispose of the packaging materials in an environmentally friendly manner in accordance with the applicable
regulations.
DIGGING SUPPORT ASSEMBLY
- Install the digging support in the hole at the end of the digging support holder. Select the required working