Page 9 of 51
5. ACCESSORIES
Dependent on the choice of control and hydraulics etc, accessories are available from Strebel at extra cost.
See Page 50
for details
6. INSTALLATION OF THE STREBEL S-CB
6.1 Unpacking
The Strebel S CB includes the following documents and accessories:
•
1 Installation and cascade instructions for the installer.
•
User instruction (incorporated).
•
1 suspension bracket.
•
Fuses and 3 nuts for mounting the burner plate (attached to the front of the gas valve).
•
1 siphon with tightening nut and gasket.
•
Reducing couplings (where required) for flue gas discharge and air supply.
THE BOILER IS SET FOR NATURAL GAS G20.On delivery, immediately check that the Strebel S-CB is
complete and without any defects. Report any damage immediately to the supplier or Strebel Ltd.
.
.
1.
After removing the carton, the easiest way to take the boiler off the pallet is as follows:
2.
Lift the pallet including the boiler (at the side of the flue outlet) to a vertical position.
3.
The boiler has a polystyrene block, which now supports the Boiler on the floor.
4.
Push the Boiler a little forward, until the pallet is not touching the floor anymore.
5.
The boiler stands now on the flow- and return pipes and the polystyrene block.
6.
Take away the pallet (See also 6.3).
The boiler can now be lifted (unclip and remove the Boiler door before lifting) easily for mounting, by
putting a hand at the lower side of the boiler.
1
2
4
5
6
