Carefully position the card into the opening on the back panel of the case,
then insert it into the motherboard expansion slot. Once the card is fully
seated into the motherboard, replace the PCI mount to the back panel
then secure the card to the PCI mount with a single screw.
Install a PCI Expansion Card (Optional)
To install a low profile expansion card, begin by removing the pre-installed PCI blanking plate and the PCI mount which is secured to the back panel with 2 screws.
Removing the PCI mount will give the extra clearance required on the rear panel opening to install the card. Note that this procedure is shown prior to replacing
the drive tray as this give more room to work with but it can also be installed after the drive tray has already been fitted.
PTC-M3x5
PCS-M2.5x6
PCI Mount
Low Prole Single Slot PCI Card
13
