Replace the Drive Tray
With all drives now fitted to the tray, carefully lower it into the case. If you
have the OPTICAL version of the FC8, angle the front of the tray to allow
the eject button to fit into the opening on the front of the case.
Replace the 4 screws to secure the tray in place, and connect all the drive
cables.
Adjust the Optical Drive
Adjust the position of the optical drive eject bar so that its flush with the
front inside edge of the case and the eject button protrudes 1-2mm
from the front face of the case.
Test that the button operates correctly by listening/feeling for the
button ‘click’ when pressing the eject button.
Once the correct position has been found, tighten the 4 screws to
secure the optical drive in place.
PTC-M3x5
PTC-M3x3
14
