Stratus V 6624, Hardware Installation Manual

Page: 31 / 78

Disposing of Shipping Materials
Unpacking and Positioning the Cabinet 1-19
2. After the stabilization period, if you still notice signs of condensation inside or
outside the cabinet, allow an additional stabilization period of two hours. Repeat
the two-hour period, if necessary, until there are no signs of condensation. Then,
continue to the next step.
3. Remove the desiccant bags and the cardboard tray in which they were shipped, if
these items are still present.
4. Continue the installation, and continue to inspect for signs of condensation. If
condensation appears, allow additional stabilization periods until there are no signs
of condensation.
N O T I C E
Before you power on the system, verify that the
installation site environment meets the environmental
operation and power requirements specified in the
Stratus
ftServer V 6624 System: Site Planning Guide (R763).
Disposing of Shipping Materials
The shipping materials contain no hazardous materials; dispose of them according to
applicable procedures or local regulations. However, retain one or two undamaged
containers and their shipping materials in case you need to repack the system for later
shipment.