Stratus V 6624, Hardware Installation Manual

Page: 64 / 78

Removing a U779V Fabric Switch
A-10 Stratus ftServer V 6624 Hardware Installation Guide (R005S)
10. Standing at the front of the cabinet, remove the rail-retaining screws on each side
of the switch (two on each side) ( Figure A-8 ).
Figure A-8. Removing Screws at Front of Cabinet
11. Standing at the rear of the cabinet, gently push the switch forward approximately
an inch.
If you are removing the top switch, it should now be resting on the bottom switch.
If you are removing the bottom switch, it should be resting on the 1U foam spacer.
rackscrews