Stratus V 6624, Hardware Installation Manual

Page: 44 / 78

Connecting External Components to the System
2-12 Stratus ftServer V 6624 Hardware Installation Guide (R005S)
Connecting the UPS
Perform the following tasks to connect each UPS unit to your ftServer system.
W A R N I N G !
All AC wiring to the UPS unit must be performed by a
qualified electrician in compliance with local and national
electric code.
1. Assemble the UPS unit. Make sure that each UPS unit is properly assembled by
following the assembly and physical installation instructions described in the UPS
vendor’s documentation.
2. Connect the AC power cords to the UPS unit.
For UPS models not qualified by Stratus, you must work with the UPS vendor and
Stratus to properly size and configure the UPS for the ftServer system.
3. Use two customer-provided Category-5 Ethernet cables to connect the UPS units
to the U772 Ethernet switches ( Figure 2-8 ).
a. Connect the Ethernet port on the A-side UPS unit to port 23 on U772 Ethernet
Switch A.
b. Connect the Ethernet port on the B-side UPS unit to port 23 on U772 Ethernet
Switch B.