STRATOS FU-230, Instruction Manual

Page: 8 / 46

©
Drechselbedarf Schulte - 8 - Translation of the Original Instruction Manual Version 1.0
3. Technical data
Overall dimensions
Length x height x depth ........................................................................... 1,350 mm x 1,250 mm x 500 mm
Weight
Bench top (without cast iron stand) .................................................................................................. 113 kg
Stand ................................................................................................................................................. 65 kg
Total weight ..................................................................................................................................... 178 kg
Distance between centres ........................................................................................................... 700 mm
Distance between centres with 400 mm bed extension ............................................................... 1,100 mm
Height of centres .......................................................................................................................... 230 mm
Headstock
Spindle thread ...................................................................................................................... M33 x 3.5 mm
Bore ........................................ No. 2 Morse taper (MT2) with a through-hole of 15 mm through headstock
Index with viewing window .................................................24-position indexing (in 15-degree increments)
Spindle lock ...................................................................................................................................... 9-way
Sliding headstock pivots by 180 degrees with detent positions at 0, 22.5, 67.5, 90, 112.5 and 180
degrees
Power unit .................................... ~230 Volt, three-phase motor, IP54, 1,420 rpm, 50 Hz 1,500 W
......................................................
Variable speed control of the motor by the potentiometer on the movable control unit.
Mains supply .................................................................................................... 230 Volt ~ 1/N/PE 50 Hz
Speed stages
(rpm on the spindle) ...................
Stage I 180
– 3,700 rpm and Stage
II 80
– 1,350 rpm
............................................................................... by moving the Poly-V belt (reduction Level II 2.74: 1).
Tailstock
Bore ............................................................................... No. 2 Morse taper (MT2) with 9 mm through-hole
Quill travel ..................................................................................................................... 100 mm with scale
Tool rest ................................................................................................................. 350 mm with
1“stems
Emission sound pressure level ................................................................................................... <79 dB
(A
)
Outrigger optional with bed extension
Work piece diameter ............................................................................................................. max. 800 mm
Work piece thickness ............................................................................................................ max. 200 mm
Basic equipment
350 mm tool rest, 150 mm face plate, MT2 live centre, 25 mm spur centre, face plate wrench to
loosen the face plate, holder for tools and movable control unit, knock out bar and English language
operating manual.
Optional accessory
Outrigger and machine bed extension (400 mm) in one with extension stems for the tool rest. Cast
iron machine stand, prepared on three sides for outrigger.