-
Assembly information:
We carefully packaged the machine at our site. Upon receipt, please check the packaging for damage or
whether the machine has become damaged during transport as well as whether the contents are
complete. In the event of complaints, please report them to your supplier immediately and do not start
using the machine. Claims at a later stage will not be accepted. Using this machine with others can lead
to loss of warranty.
The packaging is made of raw material and can be returned to the raw materials cycle via the available
local collection sites. Dispose of the packaging material only when the wood turning lathe has been
assembled and is functioning properly.
Carefully read the operating manual beforehand!
Warning!
•
Be aware of the weight of the individual components and handle them carefully to avoid
causing yourself any injuries.
•
Ensure that all bolted joints are tight but not over-tightened. Check all bolted joints for
tightness after eight operating hours.
•
During assembly, put the headstock down in such a way that the cable connections are not
damaged, and the cables are not disconnected under any circumstances.
•
The cast iron stand was developed for use with the Stratos 230. Using it with other
machines can lead to injury.
Tool and resource recommendations for assembly:
•
To support the headstock, two timber bearers are needed.
•
14 mm wrench, Phillips screwdriver, Allen key for loosening the face plate from the spindle and the
mounting parts.
•
Commercially available spirit level.
•
Timber board (length x width) 1,150 x 100 mm and about 20 mm thickness with two holes of Ø 9 mm
according to the drilling template (see Appendix 4) to secure the stand during assembly.
•
A second person is essential during assembly.
Fig. 5 Accessories
Fig. 4 Delivery contents
Lathe bed, headstock, tailstock and tool rest support with tool rest are one unit.
The stand and the accessories are packaged in separate boxes (Fig. 4 and 5).
©
Drechsler Schulte
Translation of the Original Instruction Manual Version 1.0
- 13
B
Stand
Accessories
B
Stand
Summary of Contents for FU-230
Page 1: ...FU 230 WOOD TURNING LATHE...
