©
Drechselbedarf Schulte
- 20 -
Translation of the Original Instruction Manual Version 1.0
H
Alignment
You must repeat the process of aligning the headstock whenever you have
rotated it, such as when using the outrigger.
Warning!
Aligning the headstock
Loosen the headstock and rotate it so it is aligned with the lathe bed and the tailstock. Mount the double
ended Morse taper (H) in the tailstock and, using the tailstock, insert it into the spindle so that it slides in
without resistance.
Fig. 28
If required, align the headstock accordingly. When quill and spindle are aligned, lock the headstock in
position using the clamping lever.
Fig. 29 Aligning the headstock
Summary of Contents for FU-230
Page 1: ...FU 230 WOOD TURNING LATHE...
