©
Drechselbedarf Schulte
-
Translation of the Original Instruction Manual Version 1.0
- 17
Fig. 17
Fig. 18
Putting down the headstock
Fig. 19 Placing the lathe bed onto the stand
Now fix the lathe bed to the stand with the remaining two bolts. First, hand-tighten the bolts so you can
adjust the lathe bed and the feet after removing the bar clamp. After tightening the two bolts on the lathe
bed, you can remove the timber board and tightly connect the lathe bed using the supplied bolts.
Fig. 20 Connecting the lathe bed to the stand
Summary of Contents for FU-230
Page 1: ...FU 230 WOOD TURNING LATHE...
