©
Drechselbedarf Schulte
-
Translation of the Original Instruction Manual Version 1.0
- 19
Fig. 25
Now insert the stainless-steel handle (N) into the specified socket on the motor flange to tighten the drive
belt.
Fig. 26
Attach the holder for the movable control unit to the front right of the lathe bed.
The tool holder is attached to the opposite rear of the lathe bed (Fig. 7).
Both parts are secured with two Allen set screws each from the inside of the lathe bed.
Fig. 27
Summary of Contents for FU-230
Page 1: ...FU 230 WOOD TURNING LATHE...
