MACHINE CARE & MAINTENANCE
Ensure the items are disconnected from the electrical supply and cannot operate accidentally when, servicing or cleaning.
The machine does not require any special maintenance; however the user must be aware of the following:
• Regularly clean the ventilation slots.
• Keep the casing clean.
• Check all cables before use.
• Check electrode holders, work lead/clamps and welding torches before use.
• Replace worn electrode holders and earth clamps, which do not provide a good connection.
• Replace worn consumable parts in a timely manner.
• Replace worn wire drive rollers in a timely manner
• Use a soft cloth or brush to clean electrical components. Do not use liquid cleaning products, water or especially solvents.
• Do not use compressed air to clean electrical components as this can force dirt and dust further into components, causing electrical short circuits.
Check for damaged parts
Do not use the welder with damaged parts, before further use a damaged welder must be carefully checked by a qualified person to determine that it will operate
properly. Check for breakage of parts, mountings and other conditions that may affect its operation. An authorised service centre should properly repair a damaged
part.
+DYH\RXUZHOGHUUHSDLUHGE\DQH[SHUW
7KLVDSSOLDQFHLVPDQXIDFWXUHGLQDFFRUGDQFHZLWKUHOHYDQWVDIHW\VWDQGDUGV2QO\H[SHUWVPXVWFDUU\RXWUHSDLULQJRIHOHFWULFDODSSOLDQFHVRWKHUZLVHFRQVLGHUDEOH
GDQJHUIRUWKHXVHUPD\UHVXOW8VHRQO\JHQXLQHUHSODFHPHQWSDUWVZKLFKDUHDYDLODEOHIURP\RXUQHDUHVW675$7$VWRUH'RQRWXVHPRGL
m
HGRUQRQJHQXLQHSDUWV
Storing the Welder
When not in use the welder should be stored in the dry, out of reach of children and in a frost-free environment.
WARNING!
BEFORE REPLACING CABLES / CONNECTIONS MAKE SURE THE WELDING MACHINE IS SWITCHED OFF AND DISCONNECTED FROM THE POWER SUPPLY OUTLET.
ZZZVWUDWDFRQ]
