5.Grill glass
a. Remove the grill cowl and burner
(11).
b. Lift up all the tabs which secure the
grill glass.
c. Replace the glass and bend the
securing tabs back down.
6.Main oven burner / electrode
/ injector
a. It is easier to list out the false oven
back is you first remove the oven
shelf runners.
Grasp the runners and slide out of
the hanging holes as shown.
b. From inside the oven unscrew the 3
screws which secure the false oven
back to the back of the oven.
c. Pull off the lead from the electrode
at the left-hand end of the burner.
d. Ease up the clip to release the FSD
probe.
e. From inside the oven, unscrew the 2
‘partially hidden’ screws from the
lower front edge of the oven burner
bracket.
f. Hold the right-hand side of the
burner, lift up and move to the right,
pull forward to clear the injector.
7.FSD valve (main oven)
a. Remove appliance from housing (2).
b. Looking from the front, unscrew the
left-hand side panel securing screws
and lift clear.
c. Disconnect the inlet from the FSD
valve, and the probe from the
burner clip.
d. Lift up the valve (complete with
injector) and slide it out from the
oven burner.
8.Top oven burner / electrode /
injector.
a. From inside the oven remove the
oven burner shield by slackening
the single screw through the hole in
the front of the shield, slide forward
and lift off.
b. Pull off the lead from the electrode
at the LH end of the burner.
c. Ease up the clip to release the FSD
probe.
d. Lift up the left-hand side of the
burner then clear the right, and slide
to the left to clear the injector.
Note: When replacing an oven
burner, locate the pegs into the slots
then push the right side down first.
SERVICING INSTRUCTIONS
34
18291 01 04/11/2002 12:19 Page 36
