17. Cooling fan
a. Remove appliance from housing (2).
b. Unscrew the top panel and back
panel securing screws and lift the
panels clear.
c. Disconnect the fan leads from its
terminal block and note the position
of the leads in relation to the
mounting bracket.
d. Unscrew the 4 screws which secure
the fan mounting bracket to the
oven back.
e. Remove the 4 screw which secure
the fan to the mounting bracket.
18. Door switch(es)
Note: Looking at the front of the
appliance, the main oven door switch
is behind the left-hand side panel and
the top oven / grill switch is behind the
right-hand side panel.
a. Remove appliance from housing (2).
b. Unscrew the top panel and side
panel securing screws and lift the
panels clear.
c. Unscrew the screws which secure
the door switch and its bracket to
the oven frame.
19. Thermal cutout
a. Remove appliance from housing (2),
and only pull part way out, to again
access to the screws which secure
the top (front) servicing panel.
b. Unscrew the top servicing panel
securing screws and lift the panel
clear.
c. From the back of the metal facia,
pull off the 2 leads from the cutout
and unscrew its 2 securing screws.
20. Pressure switch
a. Remove appliance from housing (2).
b. Unscrew the top panel and back
panel securing screws and lift the
panels clear.
c. The pressure switch is secured to the
back panel by 2 screws.
d. Disconnect the tubing and electrical
connections and attach to the new
switch.
e. When re-connecting the tube, make
sure that it is connected to the termi-
nal marked
L
and the other end of
the tube goes through the hole in the
back panel by about 25 mm.
Ensure that the tube does not kink.
21. Ignition generator
a. Remove appliance from housing (2).
b. Unscrew the top panel and back
panel securing screws and lift the
panels clear.
c. The ignition generator is attached
by screws to the oven back.
d. Disconnect the leads.
e. Re-connect the leads to the new
ignition generator.
SERVICING INSTRUCTIONS
37
18291 01 04/11/2002 12:19 Page 39
