Programmer/Clock
27
Fully automatic cooking cont’d
The timer end time icon is now
illuminated and the timer hours
is flashing (‘00’:00).
Enter the hour you would like the
appliance to turn off at by turning the
control knob. Press the centre control
knob once, to confirm this.
The minutes (00:’00’) now start to
flash. Enter the minutes past the hour
in the same way and press the centre
control knob to confirm.
Always remember that this is a
24 hour clock.
The timer set indicator on the bottom
right hand side of the timer display
illuminates confirming timer function
has been set correctly and will remain
illuminated until the program has fin-
ished, or it is cancelled.
Once the duration and end time have
been set, the programmer will work
out the start time.
Once the program has finished run-
ning, a tone will sound and the appli-
ance will turn itself off. To stop the
tone, press the centre control knob.
To cancel:
Press the centre control knob at any-
time.
Hours
Minutes
Hours
Minutes
Hours
Minutes
Colon
Auto programmer
on
08 27148 00 605MF 8/10/04 12:40 PM Page 28
