Programmer/Clock
25
Semi Automatic Cooking
(Continued)
End Time method
– allows you to
set a specific time of day you want
the oven to automatically switch off
and sound the alarm e.g. if you start
cooking food and you wish it to auto-
matically switch off at 16.00hrs, you
can program the end time in and the
appliance will automatically switch off
at this time sounding an alarm.
Press centre control knob to initiate
timer functions. The minute minder
icon will flash.
Select end time symbol function by
rotating centre control knob until end
time symbol is flashing, then confirm
your selection by pressing centre con-
trol knob once.
The display will show 00:00 with the
“00”:00 flashing.
Enter the end time hours by rotating
the centre control knob clockwise (+)
or anticlockwise (-) to the required
hour setting, then confirm by press-
ing the centre control knob once.
Always remember that this is a
24 hour clock.
The minutes, 00:”00” will now start to
flash - set the minutes past the hour in
the same was as you set the hour.
The timer set indicator on the bottom
right hand side of the timer display
illuminates confirming timer function
has been set correctly and will remain
illuminated until the program has fin-
ished, or it is cancelled.
The timer display will alternate
between the time of day, and the end
cooking time while the program is
running.
When end time is reached an alarm
will sound and the appliance will
switch itself off. To stop the tone
sounding - press the centre control
knob.
To cancel:
Press the centre control knob at any
time.
+
_
1) Press to
activate.
2) Turn to select
3) Press to
confirm.
Hours
Minutes
Colon
Auto programmer
on
08 27148 00 605MF 8/10/04 12:40 PM Page 26
