Programmer/Clock
Setting the time of day
Note: This is a 24 hour clock.
Ensure that the power is switched on
to the appliance.
The timer display will show 00.00,
and the first two digits (hours) will
begin to flash.
This indicates that you should set the
hour.
Use the centre control knob to set the
correct time, turning the knob clock-
wise will increase the time and anti
clockwise will decrease the time. To
confirm the correct hour once you
have set it, press the centre control
knob to confirm.
Once the hour has been set, the last
two digits (minutes) will begin to flash
indicating that they should be set.
Set the minutes passed the hour in the
same way as you set the hour.
Once the correct minutes are set,
press the centre control knob to con-
firm
Once the time is set, the colon in the
centre will begin to flash regularly,
but the time of day will remain lit.
Hours
Minutes
Colon
+
_
+
_
22
08 27148 00 605MF 8/10/04 12:40 PM Page 23
