Page 20 /59
snengde_installation-product-SN-range v1.2 - Copyright Netasq 2015
PRESENTATION AND INSTALLATION GUIDE – SN RANGE
PRESENTATION OF "SN" MODELS
SN910 model
For more information on Ethernet interfaces, please refer to the section
Connecting to the network
in the
chapter INSTALLATION PRECAUTIONS.
Front panel: connectors and LEDs
1
.
This button is for resetting to factory configuration (defaultconfig).
2
.
The serial port allows accessing the appliance in console mode; it is possible to log on to the
Firewall directly using a computer. The default baud rate on these models is 9600 baud (8N1).
3
.
Two USB 3.0 ports that can be used for secure configurations or upgrades. You may also plug in a
USB key, USB keyboard or approved USB modem.
4
.
The
Power
and
SSD activity
LEDs (from top to bottom).
5
.
The Reset button: electrically resets the Firewall.
Rear panel: connectors
1
.
A mains socket.
2
.
The product’s on/off switch.
3
.
The USB 2.0 port can be used for secure configurations or upgrades. You can also connect a USB
key, a USB keyboard or an approved USB modem
4
.
The VGA port allows connecting a monitor.
3 4
2
1
5
1
4
2
3
2
1
1
Power
LED (green)
2
SSD activity
LED (red)
