Page 18 /59
snengde_installation-product-SN-range v1.2 - Copyright Netasq 2015
PRESENTATION AND INSTALLATION GUIDE – SN RANGE
PRESENTATION OF "SN" MODELS
1
.
Online
LED (green)
2
.
Status
LED (green)
3
.
Power
LED (yellow)
PRESENTATION OF "SN" MODELS
Stormshield Network SN range models rely on the most advanced technologies to provide high performance
and optimum protection.
SN150 model
The SN150 multi-function Firewall is fanless and comes with an external power adapter.
Front panel: LEDs
This model has its LEDs on the front panel as shown below:
1
OUT interface
2
IN interface
Rear panel: connectors
The connectors on the SN150 model are located in the rear panel.
1
.
The USB port allows accessing the appliance in console mode*; it is possible to log on to the
Firewall directly using a computer. The default baud rate on this model is 115200 baud
(8N1).
2
.
The USB port 2.0 can be used for secure configuration or updates. You can also plug a USB
key or an approved USB modem into it.
The SN150 model offers five 1GbE ports:
3
.
The first zone is defined by default in INTERNAL 2 (IN) mode. It is made up of 4 switched
ports.
4
.
The second zone is the EXTERNAL 1 (OUT) interface, in external mode by default. It makes up
the zone that is needed for connecting to the internet.
5
.
This is the button for resetting the appliance to its factory settings (
defaultconfig
).
6
.
Plugging in the mains adapter starts automatically this product.
* This connection in console mode requires the installation of a driver. Depending on your operating system, you can
download a driver from:
http://www.ftdichip.com/Drivers/VCP.htm
1
2
3
1
2
2
1
3
5
4
6
