![background image](http://html.mh-extra.com/html/storm/vudo2ptzir30x/vudo2ptzir30x_installation-manual_1382791016.webp)
8
Note
The video port is covered the heat shrink tube of high shrinking ratio. After the video
connection, please heat the tube to make sure the video port is damp proof and water
proof.
1.6.3 Install the speed dome
Step 1
Pull the integration cable and multiple-function composite cable to the wall mount bracket slowly.
Step 2
Line up the straight edge of the flange of the IR speed dome to the straight edge of the quick
installation port, and then push the speed dome to the bottom of the port slowly.
Step 3
Use your hands to turn the M6*14 stainless screw (with spring washer) to the
Ф
6.5 hole of the
straight edge of the IR speed dome. Turn other two M6*14 stainless screws to groove of IR speed
dome flange. Use the inner hex tool to fix these three stainless screws. Now you have completed
the installation. See Figure 1-11.
Step 4
Please make sure:
Figure 1-11
The three stainless screws of the quick installation port are firmly secure.
The IR speed dome is fixed.
The speed dome is straight.
The steel wire connection is firm.
After your installation, the interface is shown as in Figure 1-12.
Summary of Contents for VUDO2PTZIR30X
