2
1.2
Check Accessories
Before the installation, please check the accessories one by one according to the packing list.
Please make sure all the components listed are includes.
1.3
Open the Device
Please open the box and then take out the speed dome. See Figure 1-1.
Figure 1-1
Note:
There are two types of IR intelligent speed dome which are shown in Figure 1-1, please refer to
the actual object for details.
There is laser light and IR light on the laser speed dome, the laser light is used for light
compensation while the IR light can be used to indicate whether the laser light is on or off, the laser
light is enabled when the IR light is on.
1.4
Dial Switch Setup (For Analog Speed Dome Only)
Open the cover of the speed dome; you can see there are two dial switch buttons. You can use
them to set intelligent speed dome parity, baud rate, address and etc.
Note:
When HDCVI intelligent speed dome only uses coaxial control, dial-up and other related RS485
Summary of Contents for VUDO2PTZIR30X
