StorageTek SL8500 User Manual Download Page 75

Page: 75 / 142

Servicing the Library

15-1

Servicing the Library

■

Turning Off the Library

■

Turning On the Library

■

Entering the Library without the Service Safety Door in Place

■

Using the Emergency Robotics Stop Switch

■

Manually Mounting or Dismounting a Cartridge

■

Operating the Service Safety Door

See Also

■

"Troubleshooting"

on page 14-1

Turning Off the Library

Ensure that all library requests have completed.

Take the library and the drives offline.

Ensure that the drives are empty by verifying the drive state using the SLC (see

"Viewing Library and Device Reports with the Reports Utility"

on page 12-1).

Open the rear doors of the library.

Locate the power distribution unit (PDU) in the lower-right and set the power
switch to the OFF position (0). If the library has a 2N power configuration, switch
off both PDUs.

For more information about PDUs, see the

SL8500 Overview and Planning Guide

Turning On the Library

Verify that the front access doors are closed and locked.

Caution:

If you turn off the library without performing the following

procedure, you risk possible equipment damage, cartridge damage, or
loss of data.

Note:

If you do not want to turn on the robots, CAPs, and the

elevators, leave the front access doors open.

Summary of Contents for SL8500















































































































































Search results

Summary of Contents for SL8500

Reviews:

Related manuals for SL8500

Brands by name

Popular brands

StorageTek SL8500, User Manual

Search results

Summary of Contents for SL8500

Reviews:

Related manuals for SL8500

Brands by name

Popular brands