STOLZENBERG TT 1200, Operating Manual

Page: 3 / 28

The device is designated exclusively for sweeping on solid ground
(e.g. parking lots, walkways, warehouses). The sweeper
environment must not be wet.
The sweeper may only be operated by reliable and trained
personnel.
Prevent use by children, teenagers and other unauthorized
persons, e.g. by removing the key after use.
Any other or additional use is considered to be improper (see.
safety instructions Ch. ). The manufacturer shall not be liable for
resulting damages.
The operator is solely responsible for the risk.
Intended use also includes compliance with the operating manual,
the safety instructions and the inspection and maintenance
requirements.
Only drive on routes and places that have been expressly
assigned.
Notes on appropriate surfaces (asphalt, screed, industrial flooring,
concrete, paving stones, carpets, artificial grass, etc.)
G
EBRAUCH
3
E
INLEITUNG
/ B
ESTIMMUNGSGEMÄ
ß
ER
G
EBRAUCH
3
E
INLEITUNG
/ B
ESTIMMUNGSGEMÄ
ß
ER
G
EBRAUCH
3
E
INLEITUNG
/ B
ESTIMMUNGSGEMÄ
ß
ER
G
EBRAUCH
3
E
INLEITUNG
/ B
ESTIMMUNGSGEMÄ
ß
ER
G
EBRAUCH
3
G
EBRAUCH
3 2
Safety instructions
Ÿ Only use the machine in perfect condition and as intended,
while being aware of safety and dangers, and in compliance
with this operating manual!
Ÿ In addition to the operating manual, also note the generally
applicable statutory and other binding regulations relating
to accident prevention and environmental protection!
Ÿ
It is forbidden to sweep flammable, toxic or explosive
substances, as well as flammable gases or undiluted acids
and solvents, burning or smouldering objects!
Ÿ
The device is not suitable for holding liquids, ropes, twine,
wire or the like.
Ÿ Use the machine exclusively with the hopper inserted, to
prevent injuries from flying parts.
Ÿ The transport of loads with the sweeper is not permissible.
Ÿ Faults, in particular those that may impair safety, must be
remedied immediately!
Ÿ Do not perform any modifications, additions or conversions
on the machine without approval from the manufacturer.
Ÿ
Spare parts must meet the requirements defined by the
manufacturer. This is always guaranteed with original spare
parts.
Ÿ Accessories and spare parts may only be installed by an
authorized service centre.
General safety instructions 2.1
Contents
This operating manual contains instructions for using the sweeper.
Our products are constantly being improved. It was therefore not
possible to include constructive modifications made after
printing. If you have any questions, please call our customer
service.
The operating manual must be read and applied by each person
that operates the sweeper.
In addition to the operating manual and the applicable legal
regulations for accident prevention in the country and place of
use, the widely recognized technical rules for safe and
professional work must be observed.
Contents
3
............................................................3
..........................................................................3
................................................3
.....................................4
........................................................4
................................................................4
.............................................................4
..........................................................................5
..................................................................................5
......................................................5
......................................5
..........5
.......................6
............................................................7
........................................................................8
.........8
..................................................10
...............................................12
..............................................12
........................................................................................12
............................................................................12
......................................................13
...............................13
.......................................................14
....................................................................15
...............................................15
............................................................15
..............................................................16
........................................................................17
.........................................................................18
............................................18
.....................................................................................18
..................................................................19
..............................................................20
.......................................................................................20
.................................................20
....................................................20
.....................................................21
.......................................................21
..............................21
.........22
..............................................23
.........................................................23
.........23
............23
.......................................24
........................................26
.......................................................26
.........................................................................................26
............................................................26
....................................................27
............................................................................................28
1
Introduction/Intended use
1 Introduction/Intended use
2 Safety instructions
2.1 General safety instructions
2.2 Symbols in the operating manual
2.3 Symbols on the device
2.4 Protective devices
3 Environmental protection
4 Device description
4.1 Function
4.2 Technical specifications
4.3 Control and functional elements
4.3.1 Overview of control and functional elements
4.3.2 Control system electronics / Software
4.4 Unloading the machine
4.5 Initial operation
4.5.1 Establishing the machine-battery connection
4.5.2 Inserting the batteries
4.5.3 Setting the battery type
4.5.4 Mounting the side brush
5 Operation
5.1 Drive system
5.1.1 Starting the sweeper
5.1.2 Selection of the driving direction
5.1.3 Parking the sweeper
5.2 Sweeping system
5.2.1 Sweeping wet materials
5.2.2 Sweeping modes
5.2.3 Sweeper rollers
5.2.4 Side brush
5.3 Dust suction
5.3.1 Dust suction applications
5.3.2 Fan
5.3.3 Filter vibrator
5.3.4 Filter properties
5.4 Hopper
5.4.1 Removal of the hopper
5.4.2 Emptying the hopper
5.4.3 Cleaning the hopper
5.5 Charging the batteries
5.5.1 Charging with an external charger
5.5.2 Charging with an on-board charger (optional)
5.6 Machine overload protection
6 Cleaning and maintenance
6.1 Safety instructions for cleaning and maintenance
6.2 General cleaning and maintenance instructions
7 Faults, fault indications and remedy
8 Product identification / Name plate
9 Accessories and spare parts
10 Warranty
11 Transport of the sweeper
12 EC Declaration of Conformity
13 Contact