STOLZENBERG TT 1200 Operating Manual Download Page 24

Faults, fault indications and remedy

24

Fault

Possible cause

Remedy

no function of display 
an control elements

key switch to actuated

place key to key switch and turn it

battery not connected

connect battery

low battery level

charge battery

malfunction of relay

replace relay

controller wire not connected

connect controller wire

safety switch of side door out of adjustment / side 
door open

readjust side door safety switch / close side door

disconnected wire harness

check wire harness connectors

charger plugged in

disconnect charger and machine

unsatisfying sweeping 
performance

full debris container

emptying debris container

side brooms not lowered

lower side brooms

side brooms or main brooms worn

readjust or exchange

main broom housing rubber skirts worn or 
damaged

check and exchange

main broom housing blocked

remove main brooms and clean housing

main brooms blocked by heavy debris, wires, etc. 

disassemble main brooms and remove blockages

side brooms blocked by heavy debris, wires, etc

check side brooms and remove blockages

main brooms without function

check proper assembly of main brooms, check 
motor function

unsatisfying filter 
performance

side brooms are raising dust

lift and switch off side brooms 

filter fully loaded

use filter shaker, disassemble filter and clean it 
with pressed air (from filtered side only!)

filter out of proper position

check filter position

filter became wet

replace filter

air leakage inside the filter chamber / move leak air

check filter chamber and sealings

fan without function

check ease of fan run, remove blockages 

main broom housing rubber skirts worn or 
damaged

check and exchange

no function of propel 
system

machine is turned on, display is illuminated 

remove foot off the gas pedal and turn machine off 
and on once by key switch

no function of display

remove foot off the gas pedal and turn machine off 
and on once by key switch

drive controller with malfunction

check or replace

triggered fuse

check root cause and fix it, replace / reactivate fuse

seat contact switch not operated

sit down on driver seat to operate seat contact 
switch

blocked parking brake

check brake and remove blockages

low battery level

charge battery

Summary of Contents for TT 1200





























Reviews: