STOLZENBERG TT 1200, Operating Manual

Page: 19 / 28

2
3
4
ATTENTION - The sweeper is not suitable for use
on wet surfaces! Irreparable damage to the filter
and steel components can result! On slightly
damp surfaces, it is always necessary to sweep
with the fan deactivated!
5.3.3 Filter vibrator
5.3.3.1 Manually activation/deactivation of the filter
vibrator
The filter vibrator motor only runs as long as the filter vibrator
button is pressed. During the vibration procedure, the fan is briefly
switched off, in order to prevent the direct "re-suction" of dust
already shaken off the filter. The fan starts to run independently
again after the vibration procedure.
1
2
5.3.3.2 Filter vibration functions
The filter vibrator can be operated both manually and using an
automatic mechanism. For manual operation, a vibration of the
filter is only triggered when the filter vibrating button on the
control panel is pressed. For automatic filter vibration, the control
system can be adjusted in the password-protected area, to trigger
the filter vibrator switch at a pre-set interval (up to 999 seconds)
or when a certain filter contamination is reached.
19