1.4.2
SensorTile module connection
The SensorTile (
STEVAL-STLCS01V1
) is a tiny, square-shaped IoT module built on an 80 MHz
STM32L476JG
microcontroller and a Bluetooth low energy connectivity based on BlueNRG network processor as well as a wide
spectrum of motion and environmental MEMS sensors, including a digital microphone.
Figure 10.
STEVAL-STLCS01V1 SensorTile module
The SensorTile module is not included in the
STEVAL-GPT001V1
kit but can be purchased separately and easily
plugged to the STEVAL-GPT001V1 cradle board via CN2 connector (as shown in the figure below).
Figure 11.
SensorTile module connected to the STEVAL-GPT001V1 cradle board
1.4.3
Battery
1.4.3.1
Connection
The
STEVAL-GPT001V1
development kit contains a battery disconnected from the board.
To connect the battery:
Step 1.
Unscrew and remove the cover on the back of the quadrant.
UM2260
UM2260
-
Rev 2
page 10/25
