24
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-DW12-W2 PRODUCT CODE: 10103 07/2019
Running the dishwasher
Starting a wash program
• Open the door and draw out the lower basket. Load your dishes and push the
basket back into place. Then load the upper basket the same way.
• Add dishwasher detergent according to the instructions.
• Unless you use dishwasher detergent tablets that contain a rinse aid, make sure
there is sufficient liquid rinse aid in the rinse aid dispenser.
• Close the dishwasher door, making sure you hear a click when it closes properly.
• Insert the plug into a suitable power socket (the power supply is 220-240V~ 50Hz)
and make sure the water supply is turned on to full pressure.
• Press the
POWER
button on the dishwasher control panel.
• Rotate the
PROGRAM
knob to select the desired wash program. The respective
indicator light will illuminate.
• Press the
START/PAUSE
button to start the washing program.
• At the end of the program, press the
POWER
button to shut down the unit.
NOTE:
We recommend you open the door slightly to assist in drying of the dishes.
Instructions (Cont.)
Setting a delayed start
• Press the
DELAY
button, repeatedly, to select the desired delay time for the start
of the selected washing program: 3 hours, 6 hours, 9 hours, 12 hours. The selected
delay time’s indicator light will illuminate.
Changing a program mid-cycle
If you want to change the wash program, you must do so soon after the start,
otherwise the detergent may have already been released and the wash water drained,
in which case you must reset the dishwasher and refill the detergent dispenser.
• Press and hold the
START/PAUSE
button for more than 3 seconds to pause the
machine.
• Rotate the
PROGRAM
knob and select a different program.
• Press the
START/PAUSE
button and the dishwasher will start to work again.
NOTE:
If you open the door when washing, the machine will pause, the program light
will stop blinking and the buzzer will sound every minute unless you close the
door. It will start running again about 10 seconds after you close the door and
press the
START/PAUSE
button.
