11
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-DW12-W2 PRODUCT CODE: 10103 07/2019
Getting Started (Cont.)
Installation
DANGER!
Make sure your electrical power is disconnected before installing the
dishwasher. Failure to do so can result in death or electric shock.
IMPORTANT!
All relevant pipes and electrical equipment should be installed by
professional plumbers, electricians or dishwasher installers. Make sure
to use new water supply and drain hoses; do not use old hoses.
IMPORTANT!
Read this manual to familiarise yourself with all parts and operating
principles. Pay particular attention to the safety instructions.
Unpacking the appliance
• This product has been packaged to protect it against transportation damage.
Unpack the appliance but keep the original packaging carton and materials in a safe
place. It will help prevent any damage if the product needs to be transported in the
future, and you can use it to store the appliance when it is not in use. The carton is
recyclable. Whenever possible, reuse the carton and recycle it when disposing of it.
• Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach, and dispose of them safely.
• The baskets inside the dishwasher are taped to secure them during transport.
Remove any tape, ties and foam padding from inside the dishwasher.
•
IMPORTANT!
Using the loading instructions on pages 17–19 for guidance, make
sure all parts in the upper and lower baskets are properly installed inside the
dishwasher – you may need to relocate the cup/cutlery rack for appropriate usage.
• Unwind the cord to its full length and inspect it for damage. Do not use if damaged.
In case of damage, contact our after sales support centre for advice.
Positioning the appliance
• This dishwasher is freestanding. Position it close to an existing water inlet and drain
connection and make sure there is a power point nearby, or in an adjoining cabinet.
The back should rest against the wall behind it and the sides along any adjacent
cabinets or walls. This appliance can also be recessed under a single benchtop.
• The dishwasher’s water supply and drain hoses can be positioned either to the right
or left sides to facilitate proper installation.
• Make sure the appliance does not stand on any water hoses or the power cable.
Levelling the appliance
• Position the dishwasher on a level and sturdy floor. If the floor
is uneven, adjust one of the adjustable feet until it reaches a
horizontal position; just screw it in or out a little (Fig. 1).
• Correctly levelled, the appliance will be more stable and much
less likely to move or cause vibrations and noise during operation.
Fig. 1
