30
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-PGGC75 PRODUCT CODE: 10288 09/2019
Cast iron parts
• Remove the
trivets
(pan supports)
A
from the
cooktop and the
burner caps
B
from the burner
base (Fig. 21). Clean these
cast iron parts
with a
soft cloth wrung out in warm, soapy water.
• If required, use a nonabrasive liquid detergent or
creamy cleanser for removing tough stains.
Other Useful Information (Cont.)
Fig. 21
A
B
Aluminium parts
Check the burner parts at least once a month to see if they require cleaning.
• Check that nothing is clogging the mechanism. Use a thin steel needle to
remove any dirt, combustion residues or spilled food residues from the
burner slots.
• Remove the burner bodies from the cooktop and clean them the same
way as the cast iron parts, or use a nylon brush to remove any cleaning
materials, water or dirt.
• After cleaning, rinse and dry thoroughly.
• Clean the ignition spark
electrodes
and flame failure thermocouples
(Fig. 22:
A
+
B
) carefully with a nylon brush and methylated spirits to
ensure proper ignition and operation of the safety valves.
• Refit all burner parts to their dedicated spaces on the cooktop, ensuring
they are correctly in place. The hole in the ring of the burner fits over the
ignition spark electrodes (Fig. 23). If it does not fit, you are trying to fit the
burner body onto the wrong burner.
• To check that all parts are reassembled correctly, light the burners and
allow them to dry out.
A
B
Fig. 22
Fig. 23
