15
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-PGGC75 PRODUCT CODE: 10288 09/2019
Installation (Cont.)
Installation options
When fitting a gas cooktop above a drawer or standard housing unit, suitable
precautions must be taken to prevent contact with the cooktop hob and base,
which become very hot during operation. The recommended method for over-
coming this problem is to fix a wooden panel within the cabinet at a minimum
distance of 30mm below the underside of the cooktop (Fig. 5).
NOTE:
The panel below the hob must be easily removable to enable servicing if
and when required.
Affixing the cooktop
Once the sealing tape has been installed around the underside of the cook-
top, carefully turn it back over and gently lower it into the aperture hole that
has been cut out. Push it down gently so that the cooktop is resting firmly on
the cabinet/benchtop surface.
• Secure the cooktop in position using the mounting brackets supplied.
• There are four mounting points (
1
,
2
,
3
,
4
) on the cooktop base to affix the
brackets (Fig. 6).
Fig. 5
30mm (min)
40mm
1
2
3
4
Gas inlet
connection
Fig. 6
