Stinger MC2 POWER SYSTEMS, User Manual

Page: 27 / 64

MC
2
Power Systems User's Guide Chapter 3: 35 Amp-Hour Series
User-Selectable Switch Settings
Voltage Settings Orientation
•
The diagram below illustrates each switch location and which output it controls.
•
The output voltage can be set by user between 12–20V on Power Output 1 and
Power Output 3 and between 3.3 – 12V on Power Output 2 and Power Output 4.
•
All outputs have a maximum continuous current of 4 amps.
•
User-selectable switches are located on the top and left hand side of the power
system enclosure.
•
Power outlets are intended for workstation mounted equipment ONLY .
Power Output 1 and 3 Power Settings
Power Output 2 and 4 Power Settings
1110227 Revision 2
November 2006 15
Left hand view
Voltage Settings for Power
Output 1 and Power Output 2