Stinger MC2 POWER SYSTEMS, User Manual

Page: 8 / 64

MC
2
Power Systems User's Guide Product Safety Information
1110227 Revision 2
November 2006 viii
Product Safety Information
Safety Guidelines
The MC² Power System Series™ is designed to ensure both the highest level of product
quality and safety for the user. To maintain both quality and safety, follow the guidelines
and instructions in this manual.
•
Use the power system only as intended.
•
Do not place the power system near a window. Exposing the power system to rain,
water, moisture, or constant, direct sunlight can severely damage it.
•
To maintain your warranty, refer all servicing to Stinger Medical qualified personnel.
The MC² Power System has no user-serviceable, internal parts.
•
Do not cover or obstruct any venting holes on the power system.
•
Store the power system within 10 to 30 degrees Celsius (50 to 86 degrees
Fahrenheit). Storing the system outside the temperature range could result in
permanent damage.
•
Use and maintain the cord set provided with the unit.
•
If any cord or cable is frayed or damaged, replace it immediately with another of the
same type and rating as supplied by Stinger Medical.
•
To clean the exterior of the power system, follow the UL 60601-1 standard for use in
a hospital environment. See “
Cleaning Procedures ” for more information.
•
Before cleaning the 26 Amp-Hour unit, disconnect the electronic and power
enclosures from their power sources.
•
Before cleaning the 35 Amp-Hour unit, disconnect the electronic enclosure from its
power source.