MC
2
Power Systems User's Guide
Glossary
1110227 Revision 2
November 2006
51
Glossary
AC
– Alternating Current: An electric current that reverses direction in a circuit at regular
intervals (found in a standard wall outlet)
ACC
– Accessory
Ambient
– Temperature around the circuit board
AMPS
– Ampere: a unit of electric current
Circuit
- A closed path followed or capable of being followed by an electric current
Com Port
– Communications port for data
Cord Set
– Power cord
Cycle
– Complete discharge and recharge of power system
Cycle Life
– Number of complete cycles a battery can perform before reaching the end
of its use
DC
– Direct current (such as from a battery)
Deep Discharge
– Extreme depletion of energy available from a battery
Discharging
- To cause the release of stored energy or electric charge from a battery
Exhaust
– Opening for hot air to exit power system
Frequency
- The number of repetitions per unit time of a complete waveform, as of an
electric current
Fuse
- A safety device that protects an electric circuit from excessive current
Hertz
- A unit of frequency equal to one cycle per second
Inrush
– A sudden initial pull of power from the battery upon start-up
Intake Filter
– Protective device for air inlet
Load
- A device or the resistance of a device to which power is delivered
Low Battery
– Critical state of discharge
Output
– Energy produced by a system
Medical Grade
– Standard fit for use in hospitals
Meter Display
– Visual interface for power management software
Overload
- An electrical load that exceeds the available electrical power
Peak
- The highest value attained by a varying quantity
:
a peak in current
Polyfuse
– Thermal re-settable fuse
Preventative Maintenance
– Required regular care
Retrofit
- To fit into or onto equipment already in existence or service
Suspend
– Sedentary state
Timed Out
– A state of inactivity between the battery and charger after a preset number
of attempts at communication have been made
Torx
- Has a grooved socket and receives a driver with a grooved shaft.
Unrecoverable Discharge
– A drop in voltage beyond the point where the battery will
recover in a timely manner
USB
- An external peripheral interface standard for communication between a computer
and external peripherals
Summary of Contents for MC2 POWER SYSTEMS
