Still RX70 Series, Original Instructions Manual

Page: 369 / 406

Maintenance
5
Remaining ready for operation
– Re-insert the filter mat into the filter housing.
– Make sure that the filter mat sits correctly
and accurately in the filter housing.
– Attach the heating system panelling and
secure tightly in place using the screws.
Servicing wheels and tyres
WARNING
Risk of accident!
Uneven wear reduces the stability of the truck
and increases the braking distance. The level of
wear exhibited by tyres on the same axle must be
approximately the same.
– Worn or damaged tyres (left or right) must be
replaced immediately.
– When changing wheels or tyres, ensure that this
does not cause the truck to tilt to one side (e.g.
always replace right-hand and left-hand wheels
at the same time).
– Changes must only be made following consulta-
tion with the manufacturer.
WARNING
Risk to stability!
Tyre quality affects the stability of the truck. There
is a risk of tipping!
When using pneumatic tyres or solid rubber tyres,
rim wheel parts must never be changed and rim
wheel parts from different manufacturers must not
be mixed.
– Obtain approval from the truck manufacturer
before using a different type of tyre or a different
tyre manufacturer.
57348011800 EN - 11/2018 357