Still RX70 Series, Original Instructions Manual

Page: 118 / 406

4
Operation
Switching on and starting
8
9
6
7
4
2
0
1
3
5
1
3
4
BQ_033_en
2
1
PASSWORD/PASSWORD LEVEL
appears in
the display.
– Use the drive program selection button (1)
and the menu change button (4) to select
the desired
PASSWORD LEVEL
(2).
– Confirm your selection using Soft-
key (3).
8
9
6
7
4
2
0
1
3
5
1
2
6
7
3
4
5
ESC
BQ_034_en_V2
1 2
3
4
NEW CODE
appears in the display.
The four-digit password can be entered using
the buttons (1).
CAUTION
Do not enter the password 1777!
If this password is entered, the configuration op-
tions for the fleet manager are restricted to driver
authorisations and cannot be reset independently.
The authorisations can only be reset by the autho-
rised service centre!
– Enter the new desired password using the
buttons (1).
The digits entered are shown in plain text in
the
NEW CODE
field (4).
– Confirm your selection using Soft-
key (3).
In the
NEW CODE
field,
-??-
appears briefly.
The new password is confirmed.
– Press Softkey
(2) to correct the new
password.
The display switches back to
PASS-
WORD/PASSWORD LEVEL
.
– Repeat the process steps from
PASS-
WORD/PASSWORD LEVEL
.
– To exit the configuration menu, press
Softkey (2) repeatedly until the standard
display appears.
106 57348011800 EN - 11/2018