Still RX70 Series Original Instructions Manual Download Page 159

Page: 159 / 406

Operation

Lifting

CAUTION

Risk of damage to property due to the lift mast

colliding with racks or other objects!
– Before using the "lift mast vertical position"

comfort feature, position the truck at a sufﬁcient

distance from racks and other objects.

The "lift mast vertical position" comfort feature

consists of the following individual functions:
• Display of the "lift mast vertical position"
• Automatic approach towards the "lift mast

vertical position"

• Gentle running-in to the end stops

6210_003-069_en_V2

Display of the "lift mast vertical position"

The driver can see the mast tilt on the display

and operating unit screen. The bar in the

display shows the current mast tilt relative

to the "lift mast vertical position". The arrow

above the bar marks the vertical position of the

lift mast.

57348011800 EN - 11/2018

147

Summary of Contents for RX70 Series























































































































































































































































































































































































































Search results

Summary of Contents for RX70 Series

Reviews:

Related manuals for RX70 Series

Brands by name

Popular brands

Still RX70 Series, Original Instructions Manual

Search results

Summary of Contents for RX70 Series

Reviews:

Related manuals for RX70 Series

Brands by name

Popular brands