Operation
4
Driving
Drainage channels, level crossings and
similar objects must be compensated for, and
if necessary, ramps must be provided so that
trucks can drive over these with as few bumps
as possible.
Ensure sufficient load capacity of manholes,
drain covers and the like.
There must be sufficient distance between the
highest points of the truck or the load and the
fixed elements of the surrounding area. The
height is based on the overall height of the lift
mast and the dimensions of the load; see the
chapter entitled "Technical data".
Rules for roadways and the working area
It is only permitted to drive on routes autho-
rised for traffic by the operating company or its
representatives. Traffic routes must be free
of obstacles. The load may only be set down
and stored in the designated locations. The
operating company and its representatives
must ensure that unauthorised third parties do
not enter the working area.
NOTE
Please note the definition of "operating com-
pany" in the sense of responsible persons!
Hazard areas
Hazardous areas on the roadways must
be marked by standard traffic signs or, if
necessary, by additional warning signs.
Setting the drive programme
The driving and braking characteristics of the
drive can be set on the display and operating
unit.
57348011800 EN - 11/2018
127
Summary of Contents for RX70 Series
