Operation
4
Parking
Parking
5060_003-130
Parking the truck securely and
switching it off
DANGER
Risk of fatal injury from being run over
if the truck rolls away!
– The truck must not be parked on a
slope.
– In emergencies, secure the truck
using wedges on the side facing
downhill.
– Only leave the truck when the
parking brake has been applied.
DANGER
There is a risk of fatal injury from a falling load or
parts of the truck being lowered!
– Lower the load fully before leaving the truck.
– Apply the parking brake.
– Lower the fork carriage to the ground.
– Tilt the lift mast forwards until the tips of the
fork arms rest on the ground.
– If attachments (variant) are fitted, retract
the working cylinders; see the chapter
entitled "General instructions for controlling
attachments".
– Take your foot off the accelerator pedal and
allow the engine to continue idling for a short
while.
– Turn the switch key to the left and remove it.
NOTE
Switch keys, FleetManager cards (variant),
FleetManager transponder chips (variant) and
the PIN code for access authorisation (variant)
must not be handed over to other persons
unless explicit instructions to this effect have
been given.
57348011800 EN - 11/2018
143
Summary of Contents for RX70 Series
