Still RX70 Series, Original Instructions Manual

Page: 201 / 406

Operation
4
Particle filter system
relating to parked regeneration and if parked
regeneration is not performed:
Messages Meaning
Comment
EXH.GAS PURIFIER
Carry out parked regeneration
of the particle filter.
See the section entitled "Per-
forming parked regeneration"
START
PARK. REG.?
Prompt asking whether parked
regeneration of the particle filter
should now be performed.
START IC ENGINE
Request to start the engine.
EXH.GAS PURIFIER
PLEASE WAIT
The particle filter is being
regenerated.
A status bar shows the
regeneration progress.
REGENERATION
COMPLETED
The parked regeneration
process is complete.
The truck is ready for operation
again.
PARK. REG.
URGENT! ! !
Parked regeneration of the
particle filter is urgently
required.
Until parked regeneration has
been carried out, the maximum
speed of the truck is reduced
to 2 km/h. The lifting speed is
restricted.
PARK. REG.
ERROR
Regeneration was interrupted
due to an error.
The parking brake was
released during parked
regeneration.
Apply the parking brake and
restart regeneration.
If the message appears more
than twice in succession
without the parking brake
being released during parked
regeneration, there may be
a malfunction in the internal
combustion engine. In this
case, notify your authorised
service centre.
ASH LOAD
The particle filter has become
clogged with ash. Repair must
be performed by the authorised
service centre.
EXH.GAS PURIFIER
SERVICE! ! !
Because regeneration has
not been performed, the
particle filter system must be
repaired by the authorised
service centre. To avoid further
damage, take the truck out of
operation until the repair has
been performed.
Until the particle filter system
has been repaired, the
maximum speed of the truck
is reduced to 2 km/h. The lifting
speed is significantly restricted.
.
57348011800 EN - 11/2018 189