Still RX60-16, Original Instructions Manual

Page: 397 / 412

Technical data
7
Battery specifications
Battery specifications
CAUTION
The battery weight and the battery dimensions
affect the stability of the truck.
When replacing the battery, the weight ratios
must not be changed. The battery weight must
remain within the weight range specified on the
nameplate. The location of ballast weights must not
be changed. The bottom of the battery tray must be
closed.
– Use batteries that meet DIN standards.
– Do not change the position of ballast weights.
– Check the battery weight against the information
on the nameplate.
– Only use a battery tray that is closed at the
bottom.
NOTE
Battery specifications according to DIN 43536;
cells in accordance with DIN EN 60254-2, 80 V
circuit B.
– The battery weight can be found on the
nameplate of the battery.
RX60-16 (6311), RX60-18 (6313), RX60-20 (6315)
Battery compartment dimensions [mm] Battery
designation
Capacity
[Ah]
Length
Width
Height
Tray
3 CSM 480 480
3 PzS 420 420
3 PzS 465 465
3 PzV 360 360
3 PzW 420
HAWKER
®
wf
200plus
420
TENSOR
®
TCSM 955
495
1028 567 784 233
NOTE
When converting to TENSOR
®
batteries, the
maximum speed of the truck must be limited
to 17 km/h for technical reasons. Contact
170525 EN - 10/2016 385