Still RX60-16 Original Instructions Manual Download Page 23

Page: 23 / 412

Foreword

Environmental considerations

Packaging

During delivery of the truck, certain parts

are packaged to provide protection during

transport. This packaging must be removed

completely prior to initial start-up.

ENVIRONMENT NOTE

The packaging material must be disposed of

properly after delivery of the truck.

Disposal of components and

batteries

The truck is composed of different materials. If

components or batteries need to be replaced

and disposed of, they must be:
• disposed of,
• treated or
• recycled in accordance with regional and

national regulations.

NOTE

The documentation provided by the battery

manufacturer must be observed when dispo-

sing of batteries.

ENVIRONMENT NOTE

We recommend working with a waste mana-

gement company for disposal purposes.

170525 EN - 10/2016

Summary of Contents for RX60-16





























































































































































































































































































































































































































Search results

Summary of Contents for RX60-16

Reviews:

Related manuals for RX60-16

Brands by name

Popular brands

Still RX60-16, Original Instructions Manual

Search results

Summary of Contents for RX60-16

Reviews:

Related manuals for RX60-16

Brands by name

Popular brands