Still RX60-16, Original Instructions Manual

Page: 246 / 412

5
Operation
Operation of the display operating unit
Operation of the display operating unit
Indicators
1 2
3 4
6341_003-006_V3
Standard displays
In the factory setting, the following indicators
can be seen in the display and operating unit:
1
Battery charge
Displays the available battery capacity
as a segmented bar graph in 10%
increments.
Approx. every 10 seconds, the display
switches from showing the battery charge
to the remaining operating time.
If a different drive program or a different
drive mode (e.g. Blue-Q) is selected,
the system immediately recalculates the
remaining operating time and indicates
for how long the truck can be driven if the
operating situation of the last 30 minutes
is maintained.
2 Drive program
Displays the number of the selected drive
program. To change the drive program,
refer to the section entitled "Setting the
drive program".
The Blue-Q icon
appears when the
Blue-Q function is switched on; refer to
the section entitled "Blue-Q efficiency
mode".
3 Power rating
The power rating indicator shows the
average energy consumption over the
last 30 minutes in kilowatts (kW).
Trends relating to the current energy
consumption are displayed as a vertical
bar graph . The percentage change
in each bar is shown in the table under
"Power trends indicator" below.
4 Time
Displays the current time digitally in hours
and minutes. The time can be adjusted;
see the chapter entitled "Setting the
time".
234 170525 EN - 10/2016