Still RX60-16 Original Instructions Manual Download Page 248

Page: 248 / 412

Operation

Operation of the display operating unit

7312_003-106_V2

Additional indicators

Menu change button
When the menu change button is

pressed, the following additional indi-

cators appear:

"Service in" display
Displays the remaining time in operating

hours until the next maintenance opera-

tion is due according to the maintenance

schedule in the maintenance instruc-

tions. Contact the authorised service

centre in good time.

Operating hours
Displays the total operating hours

completed by the truck. The hour meter

starts running as soon as the truck is

driven or the working hydraulics are

actuated.

Total distance
Displays the total distance driven in

kilometres.

Daily kilometres
Displays the kilometres driven for the

day.

NOTE

Ask the authorised service centre about the

speed driven indicator.

NOTE

Have all repair and maintenance work perfor-

med by an authorised service centre. This is

the only way to permanently correct defects.

– Inform the authorised service centre when

the maintenance interval is reached.

236

170525 EN - 10/2016

Summary of Contents for RX60-16





























































































































































































































































































































































































































Search results

Summary of Contents for RX60-16

Reviews:

Related manuals for RX60-16

Brands by name

Popular brands

Still RX60-16, Original Instructions Manual

Search results

Summary of Contents for RX60-16

Reviews:

Related manuals for RX60-16

Brands by name

Popular brands